Showing posts with label IS Codes. Show all posts
Showing posts with label IS Codes. Show all posts

HOW TO MEASURE PLINTH AND CARPET AREA OF BUILDINGS AS PER IS CODE IS 3861 : 2002

 MEASUREMENT OF PLINTH AND CARPET AREA AS PER IS: 3561 (2002)

GENERAL

The areas of each of the following categories shall be measured separately and shall not be clubbed together:

a) Basement

b) Floor without cladding ( stilted floor)

c) Floors including top floor which may be partly covered

d) Mezzanine floor including addl. floor for seating in assembly building/ theatre, auditorium, etc

e) Garage

f) Accommodation for service staff

g) Stair cover ( mumty )

h) Machine room;

g) Porch and

h) Towers, turrets, domes projecting above the terrace level at terrace.

MEASUREMENT OF PLINTH AREA

Plinth area shall mean the built-up covered measured at the floor level of the basement or of any storey. For the purpose of plinth area, following shall be included:

a) Area of the wall at the floor level excluding plinth offsets, if any; when the building consists of columns projecting beyond cladding, the plinth area shall be taken up to the external face of cladding ( in case of corrugated sheet cladding outer edge of corrugation shall be considered )

NOTE — In case. a common wall is owned jointly by two owners, only half the area of such walls shall be included in the plinth area of one owner.

b) Shafts for sanitary, water supply installations, garbage chute, telecommunication, electrical, fire fighting, air-conditioning and lifts

c) Stair case

d) In case of open verandah with parapets:

  1. 100percent areas for the portion protected by the projections above, and
  2.  50 percent area for the portion unprotected from above.

e) 100 percent area of the balcony protected by projection above and 50 percent area of the unprotected balcony; and

f) In case of alcove made by cantilevering a slab beyond external wall:

  1. 25 percent of the area for the alcove of height up to 1 m,
  2. 50 percent of the area for the alcove of height more than 1m and upto 2 m, and
  3. 100 percent of the area for the alcove of height more than 2 m.

The following shall not be included in the plinth area 

a) Area of loft
b) Area of architectural band, cornice, etc
c) Area of vertical sun breaker or box louver projecting out and other architectural features, for example slab projection for flower pot, etc;
d) Open platform;
e) Terrace;
f)) Open spiral/service stair cases; and
g) Area of mumty, machine room, towers, turrets, domes projecting above terrace level.

MEASUREMENT OF CARPET AREA

Carpet area shall mean the floor area of the usable rooms at any floor level

(A) From the plinth area as worked out above, the area of the wall shall be deducted ( see below). Thickness of wall shall be inclusive of finishes.
(NOTE — The various dimensions could be measured internally or externally.)

The following shall be included in the wall area:
a)Door and other openings in the wall;
b) Pillars, intermediate pillars, supports or any other such obstruction within the plinth area irrespective of their location;
c) Plaster along wall exceeding 300 cm2 in area;
d) Flues which are within the wall;
e) Built-in cupboard, almirah and shelf appearing within a height of 2.2 m from floor; and
f) Fire place projecting beyond the face of the wall in living or bed room.

The following shall be excluded from the wall area:

a) Plaster along wall not exceeding 300 cm2 in area, and
b) Chullah platform projecting beyond the face of the wall.

 (B) The carpet area shall be the area worked out as in (A) excluding the area of the following portion:

a) Verandah;
b) Corridor and passage;
c) Entrance hall and porch;
d) Staircase and stair-cover ( mumty ) ( see Note);
e) Shaft and machine room for lift;
f) Bathroom and lavatory;
g) Kitchen and pantry;
h) Store;
j) Canteen;
k) Air-conditioning duct and plant room; and
m) Shaft for sanitary/water supply installations and garbage chute, electrical and fire fighting, air-conditioning, telecommunication, lift.

NOTE — In a hall or basement, areas of portion I m beyond last step shall be part of the staircase.

The carpet areas of category mentioned in General (above) -  b), e), g), h), k) and m) are not required to be calculated.

MEASUREMENT OF RENTABLE AREA

Rentable area shall mean the carpet area at any floor level including areas mentioned below

Residential Buildings

 The rentable area shall be carpet area as worked out in 5 but shall further include the following:

a) The carpet area of kitchen, pantry, store, lavatory, bath room; and

b) Fifty percent of carpet area of unglazed and 100 percent of glazed verandah.

 It shall, however, exclude the carpet area of the covered portion of the building  such as storage space on top landings of staircase, under first landing and waist slab on floor one.

Non-Residential Buildings

The rentable area shall be carpet area increased by the carpet area of the canteen including store, kitchen and pantry attached to it.

It shall, however, not include carpet areas of bathroom and lavatory.

Balcony

A horizontal projection with a hand-rail, balustrade or a parapet, to serve as passage or sitting out place.

Mezzanine Floor

An intermediate floor in between two main floors having minimum height of 2.2 m from the floor and having a proper and permanent access to it.

NOTE — Where rules of the local bodies permit intermediate floor of minimum 1.8 m clear height, these be also considered as mezzanine floor for the purpose of measurement.

Stair Cover ( Mumty )

Itis a structure with a roof over a staircase and its landing, built to enclose only the stairs for the purpose of providing protection from weather and not used for human habitation.

 Loft

A structure providing intermediate storage space in between two main floors without having a permanent access and at a height not less than 2.0 m from the floor below.

Porch

It is a covered structure supported on pillars or otherwise for the purpose of pedestrian or vehicular approach to a building.


















IS CODES FOR DOORS, WINDOWS, GRILLS & SHUTTERS (FREE DOWNLOAD)

 IS CODES FOR DOORS, WINDOWS, GATES AND SHUTTERS 

If you find, any Codes missing here in this topic, Pl. inform.

Click (Download)

Disclaimer: The attached codes are for Educational reference and noncommercial purposes only. For Latest Reaffirmed copies, visit Bureau of Indian Standards website: standardsbis.bsbedge.com.

IS 1003 (Part 1):2003 - Timber panelled and glazed shutters – Specification Part - 1: Door Shutters       (Download)

IS 1003 (Part 2):1994 - Timber panelled and glazed shutters - Specification Part - 2: Window and ventilator shutters       (Download)

IS 1038:1983 - Specification for steel doors, windows and ventilators       (Download)

IS 1081:1960 - Code of practice for fixing and glazing of metal (steel and aluminium) doors, windows and ventilators        (Download)

IS 1361:1978 - Specification for steel windows for industrial buildings       (Download)

IS 1948:1961 - Specification for aluminium doors, windows and ventilators         (Download)

IS 1949:1961 - Specification for aluminium windows for industrial buildings         (Download)

IS 2191 (Part 1):1983 - Specification for wooden flush door shutters (cellular and hollow core type): Part -1: Plywood face panels         
(Download)

 

IS 2191 (Part 2):1983 - Specification for wooden flush door shutters (cellular and hollow core type): Part -2: Particle board and hardboard face panels       (Download)

IS 2202 (Part 1):1999 - Specification for wooden flush door shutters (solid core type): Part 1 Plywood face panels         (Download)

IS 2202 (Part 2):1983 - Specification for wooden flush door shutters (solid core type): Part 2 Particle board and hardboard face panels        (Download)

 

IS 4020:1998 - Door shutters – Methods of tests:

·         Part- 1: General

·         Part- 2: Measurement of dimensions and squareness

·         Part -3: Measurement of general flatness

·         Part -4: Local planeness test

·         Part -5: Impact indentation test

·         Part- 6: Flexure test

·         Part -7: Edge loading test

·         Part -8: Shock resistance test

·         Part -9: Buckling resistance test

·         Part -10: Slamming test

·         Part -11: Misuse test

·         Part -12: Varying humidity test

·         Part -13: End immersion test

·         Part -14: Knife test

·         Part -15: Glue adhesion test

·         Part -16: Screw withdrawal resistance test

                                                  All Parts  1 - 16 : (Download)
 

IS 4021:1995 - Timber door, window and ventilator frames – Specification       (Download)

IS 4043:1969 - Recommendations for symbolic designations of direction of closing and faces of doors, windows and shutters         (Download)

IS 4351:2003 - Steel door frames – Specification        (Download)

IS 4913:1968 - Code of practice for selection, installation and maintenance of timber doors and windows       (Download)


IS 6198:1992 - Specification for ledged, braced and battened timber door shutters      
(Download)

 

IS 6248:1979 - Specification for metal rolling shutters and rolling grills     (Download)

IS 10428:1983/ ISO 1804:1972 - Glossary of terms relating to doors       (Download)

IS 10451:1983 - Specification for steel sliding shutters (top hung)       (Download)

IS 10521:1983 - Specification for collapsible gates       (Download)

IS 14856:2000 - Glass fibre reinforced plastic (GRP) panel type door shutters for internal use – Specification      (Download)

IS 15380:2003 - Moulded raised high density fibre (HDF) panel doors – Specification      (Download)

IS CODES FOR FLOORING & FINISHING (FREE DOWNLOAD)

 IS CODES FOR FLOORING, TILES, PLASTERING & FINISHING

If you find, any Codes missing here in this topic, Pl. inform.

Click (Download)

Disclaimer: The attached codes are for Educational reference and noncommercial purposes only. For Latest Reaffirmed copies, visit Bureau of Indian Standards website: standardsbis.bsbedge.com.

IS 653: 1992 - Linoleum sheets and tiles - Specification      (Download)

IS 657: 1982 - Specification for materials for use in the manufacture of magnesium oxychloride flooring compositions        (Download)

IS 658: 1982 -  Code of practice for magnesium oxychloride composition floors        (Download)

IS 809: 1992 - Specification for rubber flooring materials for general purposes       (Download)

IS 1195: 2002 - Bitumen-mastic for flooring – Specification       (Download)

IS 1196: 1978 - Code of practice for laying bitumen mastic flooring       (Download)

IS 1197: 1970 - Code of practice for laying of rubber floors       (Download)

IS 1198:1982 - Code of practice for laying, fixing and maintenance of linoleum floors      (Download)

IS 1237: 1980 - Specification for cement concrete flooring tiles         
(Download)

 IS 1443: 1972 - Code of practice for laying and finishing of cement concrete flooring tiles       (Download)

IS 1542: 1992 - Specification for sand for plaster     (Download)

IS 1630: 1984 - Specification for mason’s tools for plaster work and pointing work      (Download)

IS 1661: 1972 Code of practice for application of cement and cement-lime plaster finishes       (Download)


 IS 2114: 1984 - Code of practice for laying in-situ terrazzo floor finish     (Download)
 

IS 2394: 1984 - Code of practice for application of lime plaster finish     (Download)


IS 2571: 1970 - Code of practice for laying in-situ cement concrete flooring       (Download)

IS 3461: 1980 - Specification for PVC asbestos floor tiles       (Download)

IS 3462: 1986 - Specification for unbacked flexible PVC flooring        (Download)

IS 3464: 1986 - Methods of test for plastic flooring and wall tiles       (Download)

IS 4441: 1980 - Code of practice for use of silicate type chemical resistant mortars        (Download)

IS 4442: 1980 - Code of practice for use of sulphur type chemical resistant mortars        (Download)

IS 4443: 1980 - Code of practice for use of resin type chemical resistant mortars         (Download)

IS 4456(Part I): 1967 - Methods of test for chemical resistant mortars:Part I Silicate type and resin type      (Download)

IS 4456(Part II): 1967 - Methods of test for chemical resistant mortars:Part II Sulphur type       (Download)

IS 4457: 2007 - Ceramic unglazed vitreous acid resisting tile – Specification        (Download)

IS 4631: 1986 - Code of practice for laying of epoxy resin floor toppings           (Download)

IS 4832(Part I): 1969 - Specification for chemical resistant mortars: Part I Silicate type          (Download)

IS 4832(Part II): 1969 - Specification for chemical resistant mortars: Part II Resin type          (Download)

IS 4832(Part III): 1968 - Specification for chemical resistant mortars: Part III Sulphur type         (Download)

IS 4860: 1968 - Specification for acid-resistant bricks         (Download)

IS 4971: 2007 - Recommendations for selection of industrial floor finishes          (Download)

IS 5317: 2002 - Specification for pitch-mastic for bridge decking and roads         (Download)

IS 5318: 1969 - Code of practice for laying of flexible PVC sheet and tile flooring         (Download)

IS 5491: 1969 - Code of practice for laying of in-situ granolithic concrete floor topping         (Download)

IS 5766: 1970 - Code of practice for laying burnt clay brick flooring         (Download)

IS 7956: 1975 - Recommendations for selection of dairy floor           (Download)

IS 8374: 1977 - Specification for bitumen mastic, anti-static and electrically conducting grade        (Download)

IS 9162: 1979 - Methods of tests for epoxy resins, hardeners and epoxy resin compositions for floor topping        (Download)

IS 9197: 1979 - Specification for epoxy resin, hardners and epoxy resin compositions for floor topping        (Download)

IS 9510: 1980 Specification for bitumen mastic, acid-resisting          (Download)

IS 9704: 1980 - Methods of tests for linoleum sheets and tiles          (Download)


IS 10132: 1982 - Method of test for materials for use in the preparation of magnesium oxychloride flooring         (Download)

 

IS 10403: 1983 - Glossary of terms relating to building finishes          (Download)

IS 12583: 1988 - Specification for corrugated bitumen roofing sheets           (Download)

IS 12866: 1989 - Specification for plastic translucent sheets made from thermo-setting polyester resin (glass fibre           (Download)

IS 13026: 1991 - Specification for bitumen mastic for flooring for industries handling LPG and other light hydrocarbon products           (Download)

IS 13074: 1991 - Code of practice for laying of bitumen mastic flooring for industries handling LPG and other light hydrocarbon products           (Download)

IS 13630: 2006 - Ceramic Tiles – Methods of Test, Methods of Test, Sampling and Basis for Acceptance     

·         Part-1: Determination of dimensions and surface quality

·         Part -2: Determination of water absorption

·         Part – 3: Determination of moisture expansion using boiling water- unglazed tiles

·         Part – 4: Determination of linear thermal expansion

·         Part -5: Determination of resistance to thermal shock

·         Part – 6: Determination of modulus of rupture

·         Part -7: Determination of chemical resistance unglazed tiles

·         Part – 8: Determination of chemical resistance - glazed tiles

·         Part -9: Determination of crazing resistance – glazed tiles

·         Part -10:  Determination of frost resistance

·         Part -11: Determination of resistance of surface abrasion – Glazed tiles

·         Part -12: Determination of resistance to deep abrasion – Unglazed tiles

·         Part - 13: Determination of scratch hardness of surface according to MOHS

·         Part – 14: Determination of impact resistance by measurement of coefficient

·         Part – 15: Ceramic tiles sampling and basis for acceptance

All Parts 1 -15    (Download)

IS 13712:2006 - Ceramic tiles – Definitions, classifications, characteristics and marking       (Download)

IS 13801:1993 - Chequered cement concrete tiles – Specification       (Download)

IS 15193:2002 - Code of practice for laying of pitch-mastic flooring for industries handling heavy hydrocarbon product like kerosene, diesel and furnace oil       (Download)

IS 15194:2002 - Pitch-mastic flooring and industries handling heavy hydrocarbon products like kerosene, diesel and furnace oil – Specification         (Download)

IS 15224:2002 - Laying of plastic translucent sheets made from thermosetting polyester resin (glass fibre reinforced) alone or in conjunction with asbestos cement sheets/steel sheets/aluminium sheets – Code of practice        (Download)

IS CODES FOR MASONRY WORKS (FREE DOWNLOAD)

 

IS CODES FOR BRICKS, BLOCKS AND MASONRY WORKS

If you find, any Codes missing here in masonry works, Pl. inform.

Click (Download)

Disclaimer: The attached codes are for Educational reference and noncommercial purposes only. For Latest Reaffirmed copies, visit Bureau of Indian Standards website: standardsbis.bsbedge.com.


IS 1077:1992 – Common burnt clay building bricks       (Download)

 

IS 1200.3:1976 – Methods of measurement of buildings and civil engineering works part -3: Brickwork     (Download)

 

IS 1905: 1987 – Code of practice for structural use of unreinforced masonry     (Download)

  

IS 2185.1: 2005 – Concrete Masonry units - Specification, Part 1: Hollow and solid concrete blocks    (Download)

 

IS 2185.2: 1983 – Specification for Concrete Masonry units Part 2: Hollow and Solid lightweight concrete blocks       (Download)

 

IS 2185.3: 1984 – Specification for Concrete Masonry units Part 3: Autoclaved cellular (Aerated) concrete blocks       (Download)

 

IS 2212: 1991 – Code of practice for Brick work      (Download)



IS 2222: 1991 - Specification for burnt clay perforated building bricks      (Download)

 

IS 2691: 1988 - Specification for burnt clay facing bricks       (Download)

 

IS 3466:1988 - Specifications for Masonry Cement       (Download)

 

IS 3495.1 to 4:1992 – Methods of tests on burnt clay building bricks Part 1: method of determination of compressive strength Part 2: Determination of water absorption Part 3: Determination of efflorescence Part 4: Determination of warpage        (Download)

    

IS 3952: 1988 - Specification for burnt clay hollow bricks for walls and partitions       (Download)

 

IS 4139: 1989 - Calcium silicate bricks-specification       (Download)

 

IS 4326:1993 – Earthquake resistant design and construction of Buildings – Code of Practice     (Download)

 

IS 4860: 1968 - Specification for acid-resistant bricks     (Download)

 

IS 5454: 1976 – Methods for sampling of clay building bricks        (Download)

 

IS 5779: 1986 - Specification for burnt clay soling bricks       (Download)

 

IS 6042: 1969 - Code of practice for construction of lightweight concrete block masonry        (Download)

 

IS 6165: 1992 - Dimensions for special shapes of clay bricks       (Download)


IS 9142: 1979 - Specification for Artificial light weight aggregates for Concrete masonry units    (Download)

 

IS 11650: 1991 - Guide for manufacture of common burnt clay building bricks by semi-mechanized process       (Download)

 

IS 12894: 2002 - Pulverized fuel ash-lime bricks – specification      (Download)

 

IS 13757: 1993 - Burnt clay fly ash building bricks – specification        (Download)

 

SP 20: 1993 – Handbook on masonry design and construction       (Download)

IS CODES FOR STEEL STRUCTURES AND STRUCTURAL ENGINEERING (FREE DOWNLOAD)

 IS Codes for Steel Structures and Structural Engineering

If you find, any Codes missing here in Steel Structures, Pl. inform.

Click (Download)

Disclaimer: The attached codes are for Educational reference and noncommercial purposes only. For Latest Reaffirmed copies, visit Bureau of Indian Standards website: standardsbis.bsbedge.com.

 IS 800: 2007 - General Construction in Steel – Code of Practice     (Download)

 

IS 801: 1975 - Code of Practice for Use of Cold Formed Light Gauge Steel Structural Members in General Building Construction       (Download)

 

 IS 802.1.1: 1995 - Code of Practice for Use of Structural Steel in Overhead Transmission Line Towers, Part 1 Materials, Loads and Permissible Stresses, Section 1: Materials and Loads     (Download)

 

 IS 802.1.2: 1992 - Code of Practice for Use of Structural Steel in Overhead Transmission Line Towers, Part 1: Material, Loads and Permissible Stress, Section 2: Permissible Stress      (Download)

 

IS 802.2: 1978 - Code of Practice for Use of Structural Steel in Overhead Transmission Line Towers, Part 2 - Fabrication, Galvanizing, Inspection and Packing    (Download)


IS 802.3: 1978 - Code of Practice for Use of Structural Steel in Overhead Transmission Line Towers, Part 3- Testing     (Download)

 

IS 803: 1976 - Code of Practice for Design Fabrication and Erection of Vertical Mild Steel Cylindrical Welded Oil Storage Tanks     (Download)

 

IS 804: 1967 -  Rectangular Pressed Steel Tanks IS 804 1967 Rectangular Pressed Steel Tanks    (Download)

 

IS 805: 1968 - Code of Practice for Use of Steel in Gravity Water Tanks    (Download)

 

 IS 806: 1968 - Code of Practice for Use of Steel Tubes In General Building Construction IS 806 1968 Code of Practice for Use of Steel Tubes In General Building Construction     (Download)

 

 IS 808: 1989 - Dimensions for Hot Rolled Steel Beam, Column, Channel and Angle Sections      (Download)

 

IS 811: 1987 -  Cold Formed Light Gauge Structural Steel Sections      (Download)

 

 IS 1173: 1978 - Hot rolled and slit steel tee bars        (Download)

 

IS 1252: 1991 - Hot rolled steel bulb angles dimensions      (Download)

 

 IS 1730: 1989 - Dimensions for steel plates,sheets strips and flats for general engineering purposes      (Download)

 

IS 1732: 1989 - Steel Bars round and square for structural and general engineering purposes     (Download)

 

IS 1852: 1985 - Rolling and cutting tolerances for hot rolled steel products     (Download)

 

 IS 1863: 1979 -  Rolled steel bulb flats -ISO 657-19    (Download)

 

IS 1864: 1979 - Hot-rolled steel L-sections for shipbuilding -ISO 657-18      (Download)

 

 IS 2314: 1986 -  Steel Sheet Piling Sections      (Download)

 

IS 2713.1 to 3: 1980 Tubular Steel Poles for Overhead Power Lines      (Download)

 

IS 2750: 1964 - Steel Scaffoldings     (Download)

 

IS 3443: 1980 -  Crane rail sections    (Download)

 

IS 3908: 1986 - Aluminium equal leg angles       (Download)

 

IS 3909: 1986 - Aluminium Unequal Leg Angles        (Download)

 

 IS 3921: 1985 - Aluminium channels       (Download)

 

 IS 3954: 1991 - Hot Rolled Steel Channel Sections for General Engineering Purposes – Dimensions   (Download)

 

IS 3964: 1980 - Light rails      (Download)

 

 IS 4000 1992 Code of practice for high strength bolts in steel structures      (Download)

 

IS 4014.1: 1967 - Code of practice for steel tubular scaffolding, Part 1: Definitions and materials     (Download)

 

IS 4014.2: 1967 - Code of practice for steel tubular scaffolding, Part 2: Safety Regulations for Scaffolding     (Download)


 IS 5384: 1985 - Aluminium I-beam     (Download)

 

 IS 5488: 1987 - Dimensions and dimensional tolerances for hot rolled steel plates for ship’s hull structure     (Download)

 

IS 6445: 1985 - Aluminium tee-sections     (Download)

 

IS 6449: 1987 - Aluminium bulb angles for marine application IS 6449 1987 Aluminium bulb angles for marine application       (Download)

 

 IS 6475: 1987 - Aluminium tee bars for marine application IS 6475 1987 Aluminium tee bars for marine application       (Download)

 

 IS 6476: 1987 - Aluminium bulb plates for marine application IS 6476 1987 Aluminium bulb plates for marine application         (Download)

 

IS 6533.1: 1989 - Code of practice for design and construction of steel chimneys, Part 1: Mechanical aspects       (Download)

 

 IS 6533.2: 1989 - Code of practice for design and construction of steel chimneys, Part 2: Structural aspects      (Download)

 

IS 7205: 1974 - Safety code for erection of Structural Steelwork       (Download)

 

 IS 7215: 1974 - Tolerances for fabrication of steel structures      (Download)

 

IS 7452: 1990 - Specification for hot-rolled steel sections for doors, windows and ventilators      (Download)

 

IS 8081: 1976 - Slotted sections       (Download)

 

IS 8147: 1976 - Code of Practice for Use of Aluminium Alloys in Structures      (Download)

 

IS 8640: 1977 - Recommendations for dimensional parameters for industrial building      (Download)

 

 IS 9178.1: 1979 - Criteria for Design of Steel Bins for Storage of Bulk Materials, Part 1: General Requirements and Assessment of Loads       (Download)

 

 IS 9178.2: 1979 - Criteria for Design of Steel Bins for Storage of Bulk Materials, Part 2: Design Criteria     (Download)

 

 IS 9178.3: 1980 - Criteria for Design of Steel Bins for Storage of Bulk Materials, Part 3: Bins Designed for Mass Flow and Funnel Flow      (Download)

 

 IS 9964.1: 1981 - Recommendations for maintenance and operation of petroleum storage tanks, Part 1: Preparation of tanks for safe entry and work      (Download)

 

 IS 9964.2: 1981 - Recommendations for Maintenance and Operation of Petroleum Storage Tanks, Part 2: Inspection      (Download)

 

 IS 10182.1: 1982 - Dimensions and Tolerances for Hot Rolled Track Shoe Sections, Part I: Section TS-L1      (Download)

 

 IS 10182.2: 1985 - Dimensions and tolerances for hot-rolled track shoe sections, Part 2: Section TS-H1      (Download)

 

 IS 10987: 1992 - Code of practice for design, fabrication, testing and installation of underground/above ground horizontal cylindrical storage tanks for petroleum products     (Download)

 

 IS 12778: 2004 - Hot Rolled Parallel Flange Steel Sections for Beams, Columns and Bearing Piles – Dimensions and Section Properties     (Download)

 

 IS 12779: 1989 - Rolling and cutting tolerances for hot rolled parallel flange beam and column sections     (Download)

 

 IS 12843: 1989 - Tolerances for erection of steel structures     (Download)

 

IS 15663.1: 2006 - Design and installation of natural gas pipelines – Code of Practice, Part 1: Laying of pipelines     (Download)

 

 IS 15663.2: 2006 - Design and installation of natural gas pipelines – Code of Practice, Part 2: Laying of pipelines in crossings     (Download)

 

 IS 15663.3: 2006 - Design and installation of natural gas pipelines – Code of Practice: Part 3 Pre-commissioning and commissioning of pipelines    (Download)

 

 SP 6.1: 1964 - ISI Handbook for Structural Engineers -Part- 1 Structural Steel Sections    (Download)

 

SP 6.2: 1962 - ISI Handbook for Structural Engineers -Part- 2 Steal Beams and Plate Girders      (Download)

 

 SP 6.3: 1962 - ISI Handbook for Structural Engineers -Part- 3 Steel Columns and Struts     (Download)

 

SP 6.4: 1969 - ISI Handbook for Structural Engineers -Part- 4 Use of High Strength Friction Grip Bolts      (Download)

 

 SP 6.5: 1980 - Handbook for Structural Engineers -Part- 5 Cold-Formed, Light-Gauge Steel Structures       (Download)

 

 SP 6.6: 1972 - Handbook for Structural Engineers -Part- 6 Application of Plastic Theory In Design of Steel Structures      (Download)

 

SP 6.7: 1972 - Handbook for Structural Engineers -Part- 7: Simple Welded Girders     (Download)

Challenges in Civil Engineering Projects

 Challenges in Civil Engineering Projects Civil engineering projects face a multitude of challenges that can impact their success. Here are ...